Specific installation devices
Special installation devices for building technology
This product group from DOLD includes the energy-saving switch, the hybrid switch relay and the network relay. You can save energy and costs with the energy-saving switch which is a combination of a timer and remote switch. With it, you can turn off the lighting in a controlled manner before the expiration of the time configured. Alongside lighting, it also makes sense for fans, dryers and other electricity consumers that seldom have to be immediately turned back on after being used. The hybrid switch relay is used in heating, ventilation, air conditioning and lighting technology for the switching of strongly inductive and/or capacitive loads such as energy-saving lamps. Electro-smog can be avoided with DOLD net relays. They are used to deactivate the power supply of electrical circuits in bedroom or other rooms sensitive to electro-smog.
Choose a product:
Alarm buzzer IK 8832
• Permanent sound, pitch fixed
• optionally with switchable interval- / permanent sound
• Devices available in 2 enclosure versions:
- I- and-version, e.g. IK _ _ _ _ with depth 61 mm, with terminals at the bottom for installation systems and
industrial distribution systems according to DIN 43 880, - S-version, e.g. SK _ _ _ _ with depth...
Buzzer SK 8832
• Permanent sound, pitch fixed
• optionally with switchable interval- / permanent sound
• Devices available in 2 enclosure versions:
- I- and-version, e.g. IK _ _ _ _ with depth 61 mm, with terminals at the bottom for installation systems and industrial distribution systems according to DIN 43 880
- S-version, e.g. SK _ _ _ _ with depth...
Buzzer RK 8832
• Permanent sound, pitch fixed
• optionally with switchable interval- / permanent sound
and 2 pitches settable
• Width: 17.5 mm and depth: 64 mm
Display unit IK 5115
• Display unit with one glow lamp,
available with different lamp colours
• Width 17.5 mm
Hybrid relay IK 3070/200
• According to IEC/EN 60 947-4-3
• Measured nominal current 20 A
• High electric life of >10⁶ switching cycles at AC 15
10 A inductive
• Silent switching
• To switch resistive, inductive and capacitive loads
• Switching at zero-crossing
• 1 NO contact
• 17.5 mm width
Stepping Switch IK 8830
• According to IEC/EN 60 669
• Impulse operation
• Switching function 1 - 0 - 2 - 0
• Pushbutton for manual actuation of the contacts
• 2 NO contacts
• Width 17.5 mm
Priority Relay IK 8715
• According to IEC/EN 60 669
• Reduces the size of the wire cross-sections required for large
electricity consumers
• Cost savings
• Width 17.5 mm
Mains relay IK 9078
• According to IEC/EN 60 255, DIN VDE 0435-303
• Identification of consumers that are switched on and off
• Adjustable between 2 and 20 VA at AC 230 V
• Slide switch for „permanently on“ setting
• LED indicator for contact position
• Devices available in 2 enclosure versions:
IK 9078: depth 59 mm, with terminals...
Mains Relay SK 9078
• According to IEC/EN 60 255, DIN VDE 0435-303
• Identification of consumers that are switched on and off
• Adjustable between 2 and 20 VA at AC 230 V
• Slide switch for „permanently on“ setting
• LED indicator for contact position
• Devices available in 2 enclosure versions:
IK 9078: depth 59 mm, with terminals...
Series switch IK 8831
• According to IEC/EN 60 669
• Impulse operation
• Switching function 1 - 1 + 2 - 2 - 0
• Pushbutton for manual actuation of the contacts
• 2 NO contacts
• Width 17.5 mm
Interface relay / input-output IK 8701
• According to IEC/EN 61 810-1
• Optionally contacts with up to a maximum 4 changeover contacts
• High thermal current Ith
• Pushbutton for manual actuation of the contact
• Operating position display
• Optionally without manual actuation and an operating position display
• Optionally for 2-wire initiator activation
•...
Interface relay / input-output IL 8701
• According to IEC/EN 61 810-1
• Optionally contacts with up to a maximum 4 changeover contacts
• High thermal current Ith
• Pushbutton for manual actuation of the contact
• Operating position display
• Optionally without manual actuation and an operating position display
• Optionally for 2-wire initiator activation
•...
Interface relay / input-output IN 8701
• According to IEC/EN 61 810-1
• Optionally contacts with up to a maximum 4 changeover contacts
• High thermal current Ith
• Pushbutton for manual actuation of the contact
• Operating position display
• Optionally without manual actuation and an operating position display
• Optionally for 2-wire initiator activation
•...
More information
The special installation devices from DOLD include the energy-saving witch, the hybrid switch relay and the network relay. Learn more now!
Competence on site
Damit wir für Sie Ihren persönlichen Ansprechpartner finden können, geben Sie bitte die fünfstellige Postleitzahl Ihres Ortes in das Suchfeld ein.
Contact for:
